0
Raise and support front of vehicle with proper jacks. Unbolt front of driveshaft from diff. Unbolt both axles from differential flanges. Disconnect wiring shift cable and vent hose. Support differential with floor jack. Remove bolts holding diff to the frame. Lower diff on jack. You may need to turn the steering one way or the other for clearance.
What else can I help you with?
How do you remove the cover to a 2001 Chevy Blazer Steering wheel column?
How to Remove the Steering wheel From a Chevy Blazer 2001
Where is the thermostat on a 2001 blazer?
The thermostat on a 2001 Blazer is just inside the larger or upper radiator hose. This hose connects to the front of the engine manifold.
How to change speakers in 2001 blazer?
To change the front speakers, you will have to remove the door panels to expose the speakers. Once exposed, unhook them by disconnecting all the wires.
How to install spark plugs on 2001 s10 blazer?
you will have to remove the front wheels and go through the wheel well. it is nessasary to have a 24" extension to reach the plugs.
Will a 2001 Chevy Blazer front clip fit on a 1995 Chevy Blazer?
NO, It is all different. Won't work.
2001 jeep grand Cherokee 4x4 oil seals location on front axle?
They are on the inside, next to the differental bearings. The entire axle has to be dissassembled to replace them.
Where is oil filter on 2001 blazer?
It is up by the front bumper, Close to the radiator.
2001 Chevy blazer front hub nut size?
36 mm
What weight oil in a 2001 Ford Ranger front differental?
According to the 2001 Ford Ranger Owner Guide : Front Axle Lubricant : ( Motorcraft SAE 80W-90 Premium Rear Axle Lubricant ) ( 1.7 liters / 3.6 U.S. pints )
How do you replace front bumpstops on 2001 Chevy blazer?
To replace the front bumpstops on a 2001 Chevy Blazer, start by safely lifting the vehicle and securing it on jack stands. Remove the front tires to access the suspension components, and then locate the bumpstops on the upper control arms. Use a socket wrench to remove any bolts holding the old bumpstops in place, then replace them with new bumpstops, ensuring they are properly seated. Reassemble the suspension components and reattach the tires before lowering the vehicle back to the ground.
What size in the front wheel bearing hub nut on a 2001 Chevy blazer?
34 mm
Where is body control module in Chevy blazer 2001?
Inside the center console, up front.
