0
How do you remove gas tank from 1967 corvette you loosened up everything but the frame rails seem to be in the way to drop the tank?
After you've loosened up all the 4x nuts/bolts from the straps, and disconnected the sending unit wires, and the fuel line (with an empty tank), then put a rag in the filler neck. Back the vehicle from the garage and raise it on jack stands so you can easily get under the rear of the vehicle.
What else can I help you with?
How do you remove the fuel tank from a 1986 corvette you lossened up everything but the frame rails seem to be in the way to drop the tank?
REMOVE THE REAR BUMPER, IT SLIDES OUT THE BACK
How do you remove 1995 Corvette seat?
To remove the seats from a 1995 Corvette, you will need to remove the front and rear nuts from the seat frame studs. You will?æalso need to remove the lug wrench that is attached to the seat frame studs.
Can you replace a 1969 Corvette frame with a 1974 Corvette frame?
Yes.
Can you put 1973 Corvette body on 1979 Corvette frame?
Yes.
Will a 2000 Corvette engine fit in a 1989 Corvette?
if you modify the frame it will
Is a 1974 frame the same as a 1975 frame in a Corvette?
No, the 1974 Corvette frame is NOT the same as a 1975 Corvette frame. I have had customers modify it to fit, but you would have to change the rear kick up or adapt a 75 and above rear bumper assembly to make it work.
How can I remove a bike wheel that does not have a quick release mechanism?
To remove a bike wheel without a quick release mechanism, you will need to use a wrench to loosen the nuts or bolts that secure the wheel to the frame. Once the nuts or bolts are loosened, you can then slide the wheel out of the dropouts on the frame. Be sure to hold onto the wheel as you remove it to prevent it from falling.
Can you fit a 1976 Corvette body on a 1980 Corvette frame?
Yes, the same frame and basic underpinnings were used for that whole generation. The C3 (1968-1982).
How do you remove the seat frame of a 1981 corvette?
If you are talking about removing the entire seat ther are 4 bolts on the undercarraige that fasten it. One side is bolt from bottom.
How do you remove the upper control arm bolts on a 71 corvette when they are rusted to the frame. The engine is still in the car and the clearance behind the bolt is minimal?
Torches & burn them off
Do Corvette bodies rust?
The fiberglass panels won't but the frame can.
What are the vin loation on a 1973 corvette frame?
locate on left a piller
