Para remover o encosto de cabeça de um Yukon XL 2002, você normalmente precisa pressionar e segurar o botão de liberação localizado na base do encosto de cabeça enquanto puxa o encosto de cabeça para cima. Se não houver um botão de liberação visível, você pode precisar inserir uma pequena ferramenta como um clipe de papel no orifício na lateral do encosto de cabeça para liberar o mecanismo de travamento. Depois que o encosto de cabeça for liberado, você pode simplesmente levantá-lo do assento. Certifique-se de consultar o manual do veículo para obter instruções específicas e precauções de
how do you remove the head rest for a sport track
pull up head rest should be a button push in an hold pull out head rest
press the button on the base of the head rest (one of the plastic mounts has a button), while holding the button in, pull the head rest up out of the seat. To reinstall, do the reverse.
push pin in hole in plastic on bottom of head rest bar.
on my 03 carava there is a little button on the bottom where it slides into the seat
Using a screw driver, remove the screws and the clips in the panel of the door and remove the panel gently. Remove any wiring connectors between the panel and the door, then remove the panel the rest of the way.
try first to pull the head rest at a certain point you can't pull it no more so try to insert a pin in small hole in the base of the head rest and pull at the same time it will come off
take a screwdriver and remove the covers on the side of the console unit these should just snap on and off now remove the hex head bolts that hold the arm rest to the unit seems like 8mm hope this helps
First, use a screwdriver and remove the screws, and remove the clips. Next, gently pull the panel, and remove any wiring connectors, then pull the panel off the rest of the way.
Pull the head rest up and look at the bottom of both shafts for small holes. Put a paper clip or something a little stronger into the holes to depress the locking tabs while lifting up on the head rest at the same time.
First tilt the seat back toward the rear to allow more room for head rest removal. The headrests have two small plastic covers on the seat. When sitting in the back seat behind the headrest, push in the adjust tab and raise the head rest up as far as it will go. Next push a jeweler's screwdriver or small drill bit into the hole on the right side cover. As you push the screwcriver into the hole, move the headrest up then you can easily remove it.
Most of BC's northern border is with the Yukon Territory. The rest is with the Northwest Territories.