To remove the hood latch on a Jeep Wrangler, first, open the hood and locate the latch mechanism. Using a socket wrench, remove the bolts securing the latch to the hood. Disconnect any cables attached to the latch, if applicable, and then carefully pull the latch away from the hood. Reassemble in reverse order if you're installing a new latch.
you have to remove the panle on the outside of the jeep between the hood and the windshield. 4 screws.
between the hood and the windshield
All fuses on a 2011 Jeep Wrangler are under the hood next to the battery.
under the hood and behind the dashboard
It should the YJ was from 87 thru 95
A 2008 Jeep Wrangler has one fuse box, it is under the hood next to the battery.
The hood release lever is below the instrument panel, under the steering wheel, in front of the driver side door on the left. You need to release the hood latch to open the hood. The safety hood latch is in the middle of the hood opening.
under the hood
no
Depends what year you have. Mine's an 02. In mine, the hood release is on the driver's side near the floor at the base of the door frame. After you pull that latch you have to release another latch which is actually under the hood itself. On my 02 the second latch is right under the front of the hood just about where the J is on the JEEP logo on the hood.
Under the hood, close to the motor.
Look under the hood & see if present.