what steps are required to remove the inside door panel on a 1997 Chevy Malibu.
If there is an access panel, yes. If not you will have to remove the tank.
You will need to remove the door panel and see if the motor and/or the regulator is bad.
Remove the door bezel.Remove the window switch.Remove the door pull trim bezel.Remove the 2 7MM bolts behind the door pull trim bezel.Using a door panel tool, you should be able to remove the plastic clips behind the door panel.
how do you take the dash board outon a 2006 chev Malibu
The 2005 Chevrolet Malibu OBD 2 port is under driver side next to kick panel
Here's a great how to video that will show you how to properly remove the door panel on your 2005 Chevy Malibu. A link has been included below.
Using a screw driver, remove the screws and the clips in the panel of the door and remove the panel gently. Remove any wiring connectors between the panel and the door, then remove the panel the rest of the way.
on top of door panel behind the mirror. remove the plastic cover by prying it off. remove the mirror nuts, and then remove mirror. if it has mirror adjustment cables on it. just remove these cables, and put on with new mirror if needed.
how do remove driver door on Chevrolet aavalnche
Using a screwdriver, remove the screws and clips from the panel. Remove the panel slowly, remove any wiring attachments, and pull the panel off the rest of the way.
Remove the liftgate inner trim panel.Remove the liftgate inner trim panel.
The 1990 Chevrolet Suburban door panel is held in place with 14 retaining clips and two screws. Remove the screws, that can be found near the door handle. Pry outward on the retaining clips to remove the door panel.