this job is super easy. the plastic around the radio and heater controls, and the ash try, just pulls off( it will take some prying, maybe). then there will be some screws holding the radio in place. remove the screws, and go to wal-mart. there they have a plug that you can buy, and you may need an adapter kit( new plastic for around the radio). the plug is in automotive, with the car stereos. it plugs into the factory plug at one end, and has loose wires on the other. plug in, then match the colored wires of the other end to the wires of the after market stereo. put it all back together, and enjoy!!!
To replace the window crank on a 1999 Chevrolet Prizm, first, remove the decorative cover if present by gently prying it off with a flathead screwdriver. Next, use a small socket or ratchet to remove the retaining screw that holds the crank in place. Once the screw is removed, pull the crank straight off the window regulator shaft. Finally, align the new crank with the shaft, secure it with the screw, and replace the cover if applicable.
Remove the old mount & replace with the new.
unscrew it turn it to the left may need to use pliers if its on tight.
The alternator blocks access to it. You need to remove the serpentine belt, then the alternator to get to the thermostat.
the headlight assembly needs to come out in order to change the bulb ive had to do that to my 98 as well.
Remove the plastic housing with small slotted screwdriver. Gently remove the bulb vertically and replace with new bulb. Replace plastic housing until you hear it click into place
1,500 lbs.
Remove the cover on the interior by prying then remove the three bolts with a 10 mm ratchet and pull it out.
Yes, the 2004 Prizm model does exist. It was produced by Chrysler as part of the Dodge lineup, specifically in the context of various models like the Dodge Neon. However, it is worth noting that "Prizm" is primarily associated with the Chevrolet Prizm, which was produced until 2002. Thus, while there may be vehicles related to the Prizm name, the 2004 model year does not feature a new Chevrolet Prizm.
How do you replace the timing belt on a 1994 Geo Prizm 1.6?
The AC relay on a Chevrolet Prizm is typically located in the under-hood fuse and relay box, which is usually found near the battery. To access it, open the hood and remove the cover of the fuse box. The relay may be labeled, and you can consult the diagram on the underside of the fuse box cover for specific location details.
To remove the rear engine mount on a 1998 Chevrolet Prizm 1.8 liter, first, ensure the vehicle is securely lifted and supported. Disconnect the battery, then remove any components obstructing access to the engine mount, such as the air intake or exhaust components. Unbolt the rear engine mount from the engine and the chassis using the appropriate socket size. Finally, lift the engine slightly with a hoist or jack to relieve tension on the mount, then remove the mount from its location.