with a Power Steering puller, which can be rented at Advance auto parts or Auto Zone
Begin by removing the belt from your 1994 Chevy Suburban power steering pump. Remove the power steering pump hose. Remove the power steering pump retaining bolts. The power steering pump will come off.
where is the power steering hose on a 1994 buick century
problem with power steering 1994 Pontiac grand am 2.3L
You will need a power steering pulley puller. It is designed to remove and install the power steering pulley. If you attempt to remove the pulley without it you will probably damage the pulley or the pump or both.
Rent or buy power steering puller/installer from parts store. you will need to make sure it is a REMOVER and INSTALLER
To remove the power steering pump on a 1994 Mazda MX-6, first, disconnect the negative battery cable for safety. Next, remove the drive belt by loosening the tensioner, and then disconnect the power steering fluid lines from the pump. Unbolt the pump from its bracket and carefully remove it from the engine bay. Ensure to catch any leaking fluid and replace any worn seals or gaskets during reinstallation.
Power steering fluidPower steering fluid
Power Steering pump reservoir.
The power steering fluid is stored in the power steering reservoir. The power steering pump is driven by a belt. Look for it.
To replace the steering gear box seal on a 1994 Ford Ranger, first, safely lift the vehicle and remove the front wheels for easier access. Drain the power steering fluid and disconnect the steering linkage and power steering lines from the gear box. Remove the gear box from its mounting, replace the worn seal with a new one, and reassemble everything by reversing the disassembly steps. Finally, refill the power steering fluid and check for leaks before taking the vehicle for a test drive.
That pulley is pressed on and off. It requires a special puller to remove it and to install it.. Some parts stores will rent them to you for free.
In the 1994 BMW 840Ci, the power steering fluid reservoir is located on the driver's side of the engine bay, near the back. It is typically a translucent plastic container with a cap labeled for power steering fluid. To check or refill the fluid, simply remove the cap and ensure the fluid level is within the recommended range.