This can be fun. Get a strong magnet and a couple of dental picks. Spray the inside of the tumblers with WD40 to free things up. Open the lock door as best you can and try the magnet and the picks with the help of an assistant.Keep trying, when you start to pull your hair out,walk away , take a break, and try again. You will get it. Been there.... Good Luck! Mark
Find the Shifter Lock Override Slot. It'll be under a cap. Remove the cap, push down on the lever inside with a nail file or something, and shift into neutral.
There are a number of reasons why your door might not lock. You could have something stuck in the door for example.
To remove a broken key from a lock, you can try using tweezers, a key extractor tool, or a small flathead screwdriver. Insert the tool into the lock and carefully pull out the broken key fragment. If the key is stuck deep inside, you may need to call a locksmith for assistance.
To effectively remove a stuck key from a lock, try using lubricant like WD-40 or graphite powder to loosen it. Gently jiggle the key while pulling it out to avoid breaking it. If the key remains stuck, seek help from a locksmith to prevent damage to the lock.
pick ur nose!
To remove a stuck key from a lock, try using lubricant like WD-40 or graphite powder to loosen it. Gently jiggle and wiggle the key while pulling it out. If that doesn't work, seek help from a locksmith.
To open a lock with something stuck in it, first, try gently wiggling the key or a thin object like a paperclip to dislodge the obstruction. If that doesn’t work, apply a small amount of lubricant, such as WD-40, to help loosen the stuck item. You can also tap the lock lightly with a hammer to shift the stuck piece. If these methods fail, consider using a lock pick or consulting a locksmith for professional assistance.
To remove a key that is stuck in a lock, you can try using lubricant like WD-40 or graphite powder to loosen it. Gently jiggle the key while pulling it out. If that doesn't work, you may need to call a locksmith for assistance.
To remove the tailgate lock on a 1989 S-10 Blazer, first remove the cover over the inside of the tailgate by removing the bolts on the side and on the handle. Pop the vinyl away from the tailgate. Then remove the bolts holding the lock on and remove the lock.
Remove the door panel, find and repair the lock linkgage.
Begin by removing the inside door panel on your 1997 Plymouth Grand Voyager. Remove the door lock linkage. Remove the door lock retaining bolts. The door lock will come out.
door car zipper key/lock window