To open a lock with something stuck in it, first, try gently wiggling the key or a thin object like a paperclip to dislodge the obstruction. If that doesn’t work, apply a small amount of lubricant, such as WD-40, to help loosen the stuck item. You can also tap the lock lightly with a hammer to shift the stuck piece. If these methods fail, consider using a lock pick or consulting a locksmith for professional assistance.
My brinks locked in the open position. What do I need to do to get it fixed
Stuck how? Lock? Door?
Yes, the key being stuck in the lock is making it difficult to open the door.
There are a number of reasons why your door might not lock. You could have something stuck in the door for example.
There really is no way. If you put the lock on something open important, you may have to cut the lock.
mine got stuck but could still be open from inside, all i needed was WD40 on lock outside and it started opening again. Sorry if it isn't this kind of stuck
yes it can lock open usually happens to people that have been drinking during a yawn but rare
To open a Protege combination lock that is stuck in the open position, first, ensure that the lock is indeed stuck and not simply misaligned. Gently jiggle the shackle while trying to turn the dial to see if it can be freed. If that doesn't work, check for any obstructions or dirt around the mechanism and clean it carefully. If the issue persists, consider contacting the manufacturer for assistance or look for a locksmith to help resolve the problem.
door car zipper key/lock window
pick ur nose!
well, unless the lock is broke or just stuck, no this is only fiction
To close a combination lock that is stuck in the open position, first, ensure that the lock is indeed set to the open state. Then, while holding the shank of the lock, rotate the dial a few full turns to reset it. Next, slowly turn the dial to the correct combination, and once you reach the final number, pull the shank down firmly to engage the locking mechanism. If it still doesn't close, check for debris or damage and consider lubricating the mechanism or consulting a professional locksmith.