mine got stuck but could still be open from inside, all i needed was WD40 on lock outside and it started opening again. Sorry if it isn't this kind of stuck
fuse for power steering on fiat punto if your looking for the fuse under the bonnet big black box on the right open up the box and you will see the big blue fuse in the middle of the top row .
open the door then drive into it with another car and it should remove it safely if not just use a hammer
On the top of the engine (just left of centre) is a little black flap marked olio you need to pull that open.
To open the boot from inside a Fiat Panda, locate the boot release lever or button, which is typically situated on the driver's side near the door or on the dashboard. If your model has a manual release, you might find a latch near the rear seats that can be pulled to unlock the boot. In some cases, you can also fold down the rear seats for access to the boot area. Always refer to the owner's manual for specific instructions related to your model.
if you open the boot there isa hex shaped bolt remove it and away you go
The best way to do that is open the door borrow another car, and drive into it its the fastest way to remove the door, then the rest is simple
hi urmm mine was on the boot. open it and look up to where the hatch bit is (the bit that keeps the boot shut) lol sorry its not technical!!! ------- hope i helped
I try to activate child safty lock, but now i can open both the doors from inside and outside as well.
The boot release on a Fiat 500 Pop is typically located on the driver's side, near the bottom of the dashboard or on the driver's door panel. It may be a small lever or button that you can pull or press to unlock the boot. Additionally, you can also open the boot using the key fob if it is equipped with that feature. Always consult your owner’s manual for the exact location and operation specific to your model year.
To change the high brake bulb on a Fiat Punto, first, open the rear hatch and locate the brake light assembly. Remove the screws or clips securing the assembly and carefully pull it out. Disconnect the wiring harness and twist the old bulb counterclockwise to remove it. Replace it with a new bulb, reconnect the wiring, and reassemble the brake light assembly.
There should be a cable hanging down from where the latch was. Just grip with a pair of pliers and give it a gentle pull. You will hear a click and then you can release and go to the front of the car and open the bonnet.If the level is slack - it points to a snapped bonnet release cable.To open the bonnet in this situation (on a Fiat Punto), you'll need to get under the car.I jacked up the car, placed it on a stand on the passenger side, and reached up underneath. I've videoed it - quick to do once you see it.http://bit.ly/Yh1dQ9TAG: Fiat Punto, Bonnet Cable, Snapped Bonnet Cable
On my 2001 1.2 its in the fuse box next to the steering wheel. you can open the two screws on the fusebox with a coin rather than round them off with a screw driver