0
What else can I help you with?
How do you remove front door speaker on my fiat punto 2003?
Use hammer.
How do you remove a fiat punto mk1 drivers door?
The best way to do that is open the door borrow another car, and drive into it its the fastest way to remove the door, then the rest is simple
How do you remove a side mirror from a 2001 Fiat Punto?
take window adjuster case of...remove the nut, is there a special tool to remove the mirror unit. There is a thread on the new mirror which goes into the door
How do you remove the inside panel of door in a Fiat Punto?
If its a 98 60sx mk1 punto then you have to take out the screws at the bottom of the door pockets then use a flat screwdriver to pop it out from the bottom workin your way to the top an lift it round the lever that opens the door then over the locking pin.
When was Fiat Punto created?
Fiat Punto was created in 1993.
How do you remove the window switch on a fiat punto front door?
To remove the window switch on a Fiat Punto front door, start by using a flathead screwdriver to gently pry off the trim panel surrounding the switch. Once the panel is removed, locate the screws securing the switch and unscrew them. Then, carefully disconnect the wiring harness attached to the switch. Finally, you can pull the switch out from its housing.
The Fiat Punto is manufactured by who?
The Fiat Punto is manufactured by the company Fiat. Fiat is an Italian manufacturing company. The manufacturing of the Fiat Punto started in 1993 and is still currently being produced.
What is the tire pressure for a Fiat Punto 1.2?
Tyre Pressure for Fiat Punto 1.2cc 8V 3 door is 29psi (front) or 2.0 bar 28psi (rear) or 1.9 bar for normal use.
Will a Fiat punto 1.2 Mk1 gearbox fit a Fiat punto Mk2 engine?
No its different
What does the warning light mean on the dashboard of a 99 Fiat Punto that is shaped like a door?
IT IS A WARNING LIGHT TO TELL YOU THAT A DOOR IS NOT SHUT PROPERLY
Fiat punto 1.9l jtd service manual?
Fiat Punto 1.9l ltd service manual?
How easy is it to change a water pump on a Fiat Punto?
if its on a punto gt is a lot of work.have to remove inlet manifold costs a lots for the job to be done in a garage.
