I remove the left front tire and go thru the wheel well opening with a 3/8" drive spark plug socket and a long "wobble" extension. There is a flat spot on the steering columm, so if you turn the wheel to line that flat spot up, it helps.
How to Remove the Steering wheel From a Chevy Blazer 2001
drop the steering column, remove entire dashboard.
To remove the steering column from a 1996 Chevrolet Blazer, first, disconnect the battery to ensure safety. Then, remove the steering wheel by unscrewing the center nut and using a steering wheel puller if necessary. Next, detach the surrounding trim, and disconnect any electrical connectors and the ignition switch. Finally, unbolt the steering column from the dashboard and the firewall, allowing you to pull it out from the vehicle.
The heater core is located on the passenger side, not the drivers side. You do not have to remove the steering column or any parts around it.
First you have to remove the panel from the bottom of the dash board to be able to get to the steering column bolts. Then, disconnect all of the wiring harnesses from the steering column. After this, go underneath the truck and disconnect the shifter linkage from the transmission. You can then remove the four bolts that hold the column up. Then, carefully slide the column out. Once the shifter linkage is against the firewall, rotate the column until you can pull the linkage through the opening in the firewall.
On steering column. Remove plastic collar from steering column behind the steering wheel (2 Phillips screws from below). Flasher relay located to the upper right of the column. Pull out away from driver.
Remove the belt from your 1993 Chevrolet S 10 Blazer power steering pump. Remove the power steering pump hose. Remove the power steering pump retaining bolts.
Unplug the wiring harness from the steering column. Remove the cover plate under the column. Remove shift linkage. Remove two bolts under the dash that hold the column up. Remove the two nuts that connect the column to the steering knuckle. Slide it out.
No. You can remove the entire column with the steering wheel still attached.
To remove the steering column in a 1986 Chevy Celebrity: 1. Remove the trim panel under the steering column. 2. Remove the noise panel. 3. If the car has column shift remove the gear indicator from the shift bowl. 4. Unplug electrical connectors. 5. Remove the four bolts that hold the steering column up. 6. At this point the steering column should pull out.
Disconnect battery. Remove air bag. Remove bolt holding steering wheel to column. Use a steering wheel puller to remove wheel from column.
Unplug the wiring harness from the steering column. Remove the cover plate under the column. Remove shift linkage. Remove two bolts under the dash that hold the column up. Remove the two nuts that connect the column to the steering knuckle. Slide it out.