answersLogoWhite

0

The alarm module (a black box that is about 3 inches square) can be unplugged with no affect on any other system. I wish I could tell you where that box is located but if you look under the dash with a flashlight the OE module does have a sticker on it that says "alarm module". It might also be under a seat. All you have to do is unplug it. I sure wish I was paying better attention back when I had mine removed. I was like, "Duh, thanks". All it did was disable the clicker, which I didnt have anyway and was the reason I did this in the first place and no other functions were affected. I still have that thing floating around in my center console. Good luck.

User Avatar

Wiki User

18y ago

What else can I help you with?

Related Questions

How do you change 1997 Jeep Grand Cherokee limited speakers?

You have to remove the door panels


Where is the fuse for a factory alarm on a 1993 Grand Cherokee Limited?

on my 1993 jeep GCL i removed fuse 6 and 7 from the fuse box to disable my alarm i hope this helps


How do you remove a rear view mirror?

how to remove the cove on right rear mirror on 203 jeep grand cherokee limited


Where the relay is for the alarm on a 1997 grand Cherokee jeep and where the alrarm is located?

i need to disable jeep factory alarm 1997 cherokee


Where is security alarm module for 1993 grand Cherokee limited located?

== == We found it located in behind the right side of dash board, in behind the glove box. For our 1993 Jeep Grand Cherokee Laredo


Where is the alarm on 97 jeep grand Cherokee limited and how do you disconnect the alarm?

It is an integral part of the computer system and can not be removed.It is an integral part of the computer system and can not be removed.


Where are the alarm-system sensors on a 1994 Jeep Grand Cherokee Limited?

Check this page out, and look at related articles. http://autorepair.about.com/library/faqs/bl903h.htm


Does the factory alarm need to be disarmed on a 1998 Jeep Grand Cherokee Larado to install an aftermarket alarm?

no


How do you disable the alarm on 99 jeep grand Cherokee?

The factory alarm can not be disabled, only repaired if malfunctioning.


What do you need in order to install an aftermarket alarm system to Jeep Grand Cherokee?

the aftermarket alarm kit


How do you disable alarm on 1999 Jeep Grand Cherokee Limited OEM?

The alarm system on your Jeep Grand Cherokee is controlled by a small, approximately 3 inch square box that plugs into wiring under your dash on probably the drives side towards the middle. It is black in color and is printed with the words "alarm module. If you unplug that the alarm system will be permanently disabled and starting issues may be resolved as well.


Where is the fuse for alarm system in 93 Jeep Grand Cherokee Limited?

In a 1993 Jeep Grand Cherokee Limited, the fuse for the alarm system is typically located in the fuse box under the dashboard on the driver's side. Look for a fuse labeled for the alarm or security system; it may also be combined with other electrical systems. If you're unsure, consult the owner's manual for a detailed diagram of the fuse box. Always ensure the vehicle is off before checking or replacing fuses.