To remove the ashtray in a 2004 Ford Freestar, first, ensure the vehicle is in park and turn off the ignition. Pull the ashtray out to its full extension, and look for any release tab or button on the sides. Press the tab or button while gently pulling the ashtray outward to detach it from the console. If there are any screws securing it, remove those first before attempting to pull it out.
you have to remove the clips on the dash and take out the lock ring around the lighterr
Remove battery cable, reattach first step.
Ford Freestar was created in 2004.
1. Remove ashtray. 2. Remove ashtray track assembly (two screws underneath). 3. Replace bulb. 4. Install ashtray track assembly. 5. Insert ashtray.
( 26 U.S. gallons ) for a 2004 Ford Freestar
One reason a 2004 Ford Freestar may stall out is because of a water damaged PCM. This is a common problem with the 2004 Ford Freestar.
The wiper arms have a flip-up cover that you need to pop up in order to get at the bolt.
According to the 2004 Ford Freestar Owner Guide : ( 26.0 U.S. gallons )
just pull the ashtray all the way out and remove the screws on the sides.
To remove the ashtray, life up gently and pull out at the same time. Some ashtrays have a button that can be pushed for removal.
To get to the ashtray bulb on a 1997 Z71, the console top needs to be removed. First remove the ashtray from its holder. Then, remove the clips on the sides holding the console top on.
how can ford freestar 2004 water pump be replaced