0
What else can I help you with?
On a 2003 Ford F250 diesel how do you remove the serpentine belt?
Use a breaker bar in the belt tensioner to relax tension and then remove/replace belt
How to remove serpentine belt on 2003 ford ranger?
Release the pressure on the belt tensioner and belt should slide off pulleys
How do you install a cooling system belt on a 94 Ford Tempo?
# Install belt on to all pulleys except belt tensioner # Using the extension insert it into the belt tensioner and push away from you.Carefully install the ribbed belt on the tensioner and slowly allow the extension to move toward you as tension is placed on the belt # Remove extension from belt tensioner and inspect the belt to be sure it is seated correctly on all the pulleys if not remove belt and reinstall
How do you reinstall a belt tensioner for a 87 Ford Taurus?
To re-install a belt tensioner for a 1987 Ford Taurus, tighten the bolt when the tensioner pulley is holding the serpentine belt tight. The belt tensioner sits in a slot and can be adjusted to hold the belt tight.
Where is the tensioner on a 97 Ford Escort?
there are two tensioners, the serpentine tensioner and the timing belt tensioner. the timing belt tensioner is behind the timing belt cover ;)
Where is the tensioner on a 2004 Ford Ranger?
where is the tensioner for the serpentine belt on a 2004 ford ranger
How do you take a belt tensioner of a 1987 Ford Tempo?
If you look carefully at the tensioner, you will see a square slot drive. Insert a ratchet in there and turn it. Can't remember if up or down, but you will see the tensioner slack enough to remove the belt.
On a 2004 Ford F250 diesel how do you remove the serpentine belt?
release the tensioner with a 1/2 in braker bar or ratchet and work the belt out.
How do you change alternator in 2004 ford explorer?
Remove the belt by using a 3/8 ratchet in the belt tensioner below the alternator. Insert the ratchet into the tensioner and push to loosen the belt. When the belt is loose, remove it from the alternator. Remove the electrical connections from the alternator. Then remove the 3 mounting bolts. The alternator should now be diaconnected from the engine. Installation is the reverse.
How do you replace Ford lightning belt?
Disconnect the battery. Rotate the belt tensioner to release the belt. Have a helper remove the belt while holding the tensioner. Replace the belt, putting the new one on over the pulleys in the same direction. The tensioner can now be released.
How do you remove and install a ford windstars dipstick oil tube?
how to remove broken dipstick tube ford winstar
Broke tensioner on 1998 Ford Escort wagon what do I do?
Tensioner should be removable and replaceable by single mounting bolt are you referring to the belt tensioner on engine?if so. remove tensioner,buy a new one, and replace. this is not a big job. you will also need to replace belt at same time
