Remove the two slider/anchor pins using a 3/8" Allen wrench and the caliper will come off.
Front or rear, remove wheel, remove caliper, remove caliper bracket, remove rotor.
you remove the whell and then remove the bolts from the back of the calipier then remove the bolts from the monuting for the caliper then remove the rotor by pulling it off. if it is all one piece then you have to remove the hub itself
Take off the tire, remove the brake caliper, and pull off the rotor.
To replace the brake rotors on a 2005 Chevy Colorado Z71 4WD truck, first, lift the vehicle and secure it on jack stands. Remove the wheel and tire, then use a socket to take off the caliper bolts and slide the caliper off the rotor. Next, remove the caliper bracket if necessary, then take off the old rotor by removing any retaining screws or clips. Install the new rotor, reassemble the caliper and bracket, and finally, reattach the wheel before lowering the vehicle.
remove wheel use i believe a T-55 torx bit to remove caliper if rotors are stuck carefully heat rotor center around hub assembly and remove rotor (easier said than done!!!) compress caliper piston with c- clamp replace brake pads and calipers then wheel. sometimes it is handy to remove the cap from the master cylinder to relieve air.
To replace the front rotors on a 2000 Chevy Express, first, safely lift the vehicle and remove the front wheels. Next, remove the brake caliper by unbolting it and hanging it securely to avoid strain on the brake line. Then, take off the old rotor by removing the retaining screws, if present, and sliding it off the hub. Finally, install the new rotor, reattach the caliper, and repeat the process on the other side before lowering the vehicle and testing the brakes.
Remove the tire and wheel from your 1999 Chevy Cavalier. Remove the brake spring and the caliper. The brake pads will come off. Tap on the rotor with a hammer or mallet. The rotor will slide off. Reverse the process to install the new brakes and rotor.
2 WD? Remove wheels Remove caliper mounting bolts Slide caliper off rotor Remove rotors if they are the "peel off" type If not "peel off" Same as above, but remove center dust cover Remove cotter pin Remove washer and nut Slide rotor off spindle (bearing will slide out first)
Remove the wheel and the four bolts that hold it. Very easy
How do you change the front rotors on a 2004 Chevy tracker
Take wheel off, remove brakes/caliper, remove dust cap, remove cotter pin, remove nut/washers and its off
remove wheel and brake caliper,break rotor loose from hub with rubber mallet by hitting outward