Remove the light assy then turn the bulbs countereclockwise to remove the bulbs.
yes, you have. And change new seal too.
remove the radiator, then remove 4 screws that holds the fan ,,done..
open the hood remove the air intake funnel remove the base of the air duck and you will find the blower..
I would advise you to check out the Previa site on yahoo. It is an excellent site. Check this site it out http://tarago.blogspot.com/ , it helped a lot.
Remove the passengers side front seat. remove the metal engine cover after pulling carpet back, remove the long metal cover covering the spark plugs and wires.
remove the radio.and once outside remove the tape deck wich is screw to te radio.
Get a Haynes manual - there's a lot of stuff to take off
look in how to bleed air off cooling system
remove centre consul heating cover under there there are 2 screws remove them. open doors were dash turns in remove cover each side and remove screws. gentley pull black trim and heater front towards you and keep safe. the clocks are held in with a screw in each corner, remove those and litf out unplug connectors in the back of the clocks and change bulb. fit as reverse. ian
Remove the engine fuse for 10 seconds and put them back simple
pull out the battery or what ever is in front of it , or get a flash light and get your hands in there. it cant be that hard , you must atleast look at the back or call Toyota to see if it is poossible to remove the bulb and how to do it
The dashboard on a Toyota Previa is held on with several bolts. All must be removed. After the bolts are removed so must be the remaining clips. The dashboard that has to be carefully removed from the cabin of the vehicle.