To remove the glove box on a Chevy Celebrity pull the glove box out, then push up on the tab on the underside of the box to release the latch that keeps the globe box in. It will then simply pull the rest of the way out.
Pull the glove box out then reach underneath and push up the plastic tab to release the stop. The glove box will then pull on out
Are you asking about the trim panel above the glove box or the trim panel in front of the radio or the trim panel around the instrument cluster? Ask again telling us which panel you wish to remove.
The heater core in a 1987 Chevy Celebrity is in the heater plenum to the right of the hump and below the glove compartment.
It will be inside the glove box to the right. You will have to remove the glove box.
The ECM, computer, is bolted to the firewall inside the car behind the glove box. To Change the ECM: 1. Remove the under dash panel. 2. Remove the glove box for better visibility. It makes it easier to see what you are doing, but is not completely necessary. 3. Un-latch the wire loom plugs and pull them out. 4. Remove the bolts and pull the ECM out. Reverse the above to put the ECM back in.
Take it to the dealer.
The computer, ECM, is on the firewall inside the car and behind the glove box.
behind the glove box on passenger side...you will have to remove glove box to get to it
above the glove box, shouldn't need to remove the dash just the glove box.
You dont. You just have to remove the glove box insert.
Behind the glove box. Check your owner's manual, it will tell you how to remove the glove box and replace the filter.