* On models with power door locks and/or power windows disconnect the negative battery cable.If equipped with Delco Loc 2 or Theftlock audio system make sure you have the activation code * On models with power door locks pry the power door lock switch out of the door trim panel with a flat-blade screwdriver unplug the electrical connector from the switch and remove the switch * On models with power windows pry the power window switch out of the trim panel with a flat-blade screwdriver unplug the electrical connector from the switch and remove the switch * On models with manually-operated windows remove the window regulator handle * Remove the trim panel screws * Once all of the screws are removed detach the trim panel from the door disconnect any electrical connectors and remove the trim panel from the vehicle by lifting it up and away from the door
Remove the dppr panel and there are screws on the inside.
i have a '96 cavalier and all u have to do is stick a screw driver in the panel beside the radio to where u can get your fingers in there and just pull it out. but be careful that u dont break the panel or the clips.
screwdriver
The 1997 Chevy Cavalier dashboard is held in place with for retaining bolts and eight retaining clips. Remove the retaining bolts and pry outward on the retaining clips.
Remove the transmission pan.
what steps are required to remove the inside door panel on a 1997 Chevy Malibu.
Where is radiator temperature sensor located on a 1997 2.4L Chevy cavalier
where is the ignition control module loacted on a 1997 chevy cavalier
the clutch went out on my 97 Chevy cavalier how do i fix it
Remove the radiator and take it to a radiator shop.
yes
125 hp