Up underneath the glove box in the dashboard on the passenger side.
hit it with hammer
there are 2 plastic tabs on each side push them in and the glove box will drop down
you must first remove the glove box,then you will be able to get at the screws that hold the box in place
To remove the glove box in a 1994 Ford F-150, first, open the glove box and remove any contents. Locate and remove the screws securing the glove box door to the dashboard; these are typically at the top and possibly the sides. Once the screws are removed, gently pull the glove box door out from its hinges. If necessary, disconnect any wiring for interior lights before fully removing the glove box assembly.
how to remove my glove box
To remove the glove box from a 2007 Ford Explorer, first, open the glove box and locate the stops on each side. Press in on the sides to release the stops and allow the glove box to drop down. Next, remove any screws or fasteners securing it to the dashboard. Finally, disconnect any wiring if equipped with lights, and gently pull the glove box out to complete the removal.
how to remove glove box in 1993 camry
Assuming it's the same as a 94 C1500, Open the glove-box, remove the screws across the top and bottom, remove the cables that support the glove-box door, remove the glove box door, remove the glove box compartment. I have a 95 K1500, you just have to squeeze the top of the glove box, clear the mount and then remove the plastic strap on the left side, and then open the glove box fully it just fall down, no need to unscrew anything.
On a 1998 Ford Windstar : ( # 16 / 20 amp )
On the Ford Windstar 2001 model, it is under the hood, next to the battery.
To remove the glove box from an S10 pickup, first, open the glove box and remove any contents. Next, locate the screws or bolts securing the glove box hinge and the stops; these are typically found on the sides and bottom of the glove box. Remove these fasteners using a screwdriver or socket wrench, then gently pull the glove box out of its mounting brackets. Be cautious of any wiring or clips attached to the glove box and disconnect them if necessary.