0
What else can I help you with?
Will a plow from a 1980's Chevy pickup fit my 1990's Chevy pickup?
It will have to be of a 88-95 Chevy i believe.
Will a 350 fit in a 1980 Chevy pickup?
yes
How do you remove the distributor cap on a 1980 Chevy pickup?
there are clips on the sides or Philip screw looking clips on those push down then turn
Will 1985 Chevy full size front fenders fit on 1980 pickup?
yes
Fuel filter location on a 1980 Chevy pickup?
inside frame , drivers side
What is my 1980 Chevy c20 pickup worth?
all you can get, depending on the shape and how well it runs
Does a 1980 Chevy pickup require a smog test for registration in California?
In short, YES.
Will the 1972 Chevy pickup doors fit on a 1973 Chevy pickup?
No a 1972 Chevy pickup is not the same model as a 1973 Chevy pickup. I believe it goes from 1967-1972, 1973-1980, 1981-1987. Doors will work from 1973-1976, 1977-1987. You would need to find 1972 doors as they are the only ones taht will fit a 1972. 1967-1971 are the same but there is something different about 1972 doors.
What is the fuel capacity of a 1980 34 ton Chevy pickup with dual gas tanks?
Twenty gallons per tank.
What is the proper spark plug gap for a 1980 Chevy 350 in a 4wd half ton?
The proper spark plug gap for a 1980 Chevy 350 Pickup is .045, according to spark plug manufacturer (Autolite, Bosch, NGK) specs.
How do you hotwire 1980 Chevy pickup?
there is an ignition box about three quarters of the way down the serring collom that can be removed and oporated by a bent pice of wire
How do you remove headlight from 1980 Honda goldwing fairing?
I just saw this in a Goldwing Repair book at the dealer. First look at the headlight adjustment knob inside the faring. Twist it until you see a retaining screw. Remove the screw and then remove the knob. There should be a nut around the main headlight shaft that you can remove, which will then allow you to slide the entire headlight assembly out through the front of the fairing. Once the whole assembly is out, remove the retaining ring and disassemble the light housing. Reverse the process to reassemble.Good luck!
