YOU MUST REMOVE THE DASH AND THEN THE HEATER BOX, 82 MUSTANGS USED TO HAVE AN ACCESS PANEL BUT NOT YOURS, IT IS A LONG JOB IF YOU HAVEN'T DONE IT BEFORE
in order to do that you have to remove the dash & all the lines going to the core i have a 90 model i just had some1 else do it cause its a ruff job!!!!
To remove the heater core from a 1984 Mazda RX-7, first, disconnect the negative battery cable and drain the coolant from the cooling system. Next, remove the dashboard and the center console to access the heater core housing. Disconnect the hoses attached to the heater core, then unbolt and remove the heater core from its housing. Reinstalling the new heater core involves reversing these steps, ensuring all connections are secure.
For the HEATER CORE ? No
Best to get the shop manual but basically: Reomove Heater hoses from engine block and drain. Remove glove box. Disconnect cables that connect to heater core. Disconnect heater core from firewall. Disconnect hoses from heater core. Pull heater core from under dash.
To remove the heater core from a 1984 Oldsmobile 98 Regency, first, disconnect the battery and drain the coolant from the radiator. Next, remove the dashboard and any necessary components to access the heater core housing. Disconnect the heater core inlet and outlet hoses from the engine compartment, then unbolt and carefully remove the heater core from its housing. Finally, reverse the process for installation, ensuring all connections are sealed properly to prevent leaks.
The heater control valve in a Mustang is located within the engine. It is right in the heater's core and where the coolant is located.
You can access the heater core from the passenger side kick plate in your 1964 Chevrolet Corvette. Remove the heater core water supply hoses. Remove the heater core retaining bolts. The heater core will come out.
i have a 62 cadillac,how do you remove the heater core
To replace the heater core in a 1984-1989 Nissan 300ZX, first disconnect the battery and drain the coolant. Remove the dashboard and the center console to access the heater core. Detach the heater hoses from the core, unbolt it from the housing, and then install the new heater core by reversing the disassembly steps. Reconnect all components, refill the coolant, and check for leaks.
Remove the water from the cooling system. Remove the water hose from the heater core. Remove the heater core retaining bolts. Reverse the process to install the new heater core.
To remove the heater core on a 1992 Grand Marquis, first remove the dash board. Then remove the AC box to have access to the heater core.
Drain the water from your 1988 Chevy cooling system. Remove the heater core water supply hoses. Remove the heater core retaining bolts. The heater core will come out.