0
First you have to remove the dash panel, its all one piece and has about 4 screws holding it in along with various clips. The first screw is in the drives side fuse panel, then you should find 2 under the dash by your feet. remove the plastic cover first to find them.. the last one is in the passanger side fuse panel. once you have the screws reomved you simply need to pull the dash off starting at one side or the other. it helps here to tilt the steering wheel down as far as it will go. pull gently and you will hear the clips let go and the dash will come off, work one side to the other for smooth removal. Once you have the dash off you can see the cluster, there are 4 screws that hold the cluster in also. 2 at the top and 2 at the bottom. remove those screws and the cluster will be floating in place. when removing the cluster be careful not to pull too hard because you will have to disconnect the wiring harnesses before you can pull it out all the way. there are 3 harnesses if you have traction control, 2 if you dont. simply unclip the 4 way harness, the power harness, and if you have it - the traction control harness and the gauge cluster should be sitting in your lap!
What else can I help you with?
How do you fix instrument cluster 2004 impala SS?
To fix the instrument cluster on a 2004 Impala SS, first check for blown fuses or loose connections behind the cluster. If those are fine, consider resetting the system by disconnecting the battery for about 15 minutes. If the issue persists, you may need to remove the cluster and inspect it for damaged components or solder joints, or replace it entirely if necessary. If you're not comfortable with this, seeking assistance from a professional mechanic is advisable.
How do you remove instrument cluster 2004 Cadillac SRX?
To remove the instrument cluster from a 2004 Cadillac SRX, start by disconnecting the negative battery cable to ensure safety. Next, use a screwdriver to remove the trim around the cluster and any screws securing the instrument panel. Carefully pull the cluster out, disconnect the wiring harnesses attached to the back, and finally remove the cluster from the vehicle. Always refer to a repair manual for specific instructions and torque specifications.
Where is the Stepper motor for a 2004 Chevy impala located?
The stepper motor is located in the instrument cluster. The stepper motor is what turns the needles in all the gauges.
How do you remove the 2004 Isuzu ascender instrument cluster?
To remove the instrument cluster from a 2004 Isuzu Ascender, first, disconnect the negative battery cable to ensure safety. Then, remove the trim panel surrounding the cluster by unscrewing any visible screws and gently prying it off. Next, unscrew the cluster mounting screws, carefully pull the cluster out, and disconnect the wiring harnesses at the back. Be sure to handle the cluster and wiring with care to avoid damage.
How do you remove the instrument cluster on a 2004 Nissan Xterra 3.3 liter 6 cylinder?
To remove the instrument cluster on a 2004 Nissan Xterra, first disconnect the negative battery terminal to ensure safety. Then, remove the dashboard trim pieces surrounding the cluster, typically by gently prying them off. Next, unscrew the bolts securing the instrument cluster and carefully pull it out from the dashboard, disconnecting the wiring harness at the back. Finally, set the cluster aside for any necessary repairs or replacements.
How do you remove the bezel instrument cover in a 2004 suzuki forenza?
To remove the bezel instrument cover in a 2004 Suzuki Forenza, start by carefully prying off the trim surrounding the instrument cluster using a flathead screwdriver or a trim removal tool. Once the trim is removed, unscrew any fasteners holding the instrument cluster in place. Gently pull the instrument cluster forward to access the wiring connectors, which you can disconnect. Finally, lift the bezel instrument cover off to complete the removal.
How do you change the turn signal flasher on 2004 Impala?
It should be located on the dash just up and left of the sterio near the instrument cluster
How do you change instrument cluster on 2004 Pontiac sunfire?
To change the instrument cluster on a 2004 Pontiac Sunfire, first disconnect the negative battery cable to ensure safety. Remove the trim panel surrounding the dashboard using a flathead screwdriver or a trim removal tool, then unscrew the screws holding the cluster in place. Carefully pull the cluster out, disconnect the wiring harness, and replace it with the new cluster. Reassemble everything by reconnecting the wiring, securing the cluster, and reinstalling the trim panel.
How do you remove the instrument cluster renalt megane dynamique 20044?
To remove the instrument cluster from a 2004 Renault Megane Dynamique, start by disconnecting the vehicle's battery to ensure safety. Then, use a flathead screwdriver to gently pry off the trim surrounding the instrument cluster, taking care not to damage any clips. Once the trim is removed, unscrew the bolts securing the cluster to the dashboard, and carefully pull out the cluster, disconnecting the wiring harness at the back. Finally, replace or repair as needed, and reassemble in reverse order.
Where is the engine heat indicator in toyata raum 2004 model?
On the instrument cluster.
Where is the BCM on a 2004 Dodge Durango?
The instrument cluster is also the body computer.
If you swap an old instrument panel cluster from a 2004 Chevrolet Impala with a new one will the same mileage on the odometer appear when you plug in the power wiring?
No it will not, the mileage information is stored in the cluster so you have to have it repaired. Do not lose the original or else you will pay much more. Repair costs range at about $150
