To change the instrument cluster on a 2004 Pontiac Sunfire, first disconnect the negative battery cable to ensure safety. Remove the trim panel surrounding the dashboard using a flathead screwdriver or a trim removal tool, then unscrew the screws holding the cluster in place. Carefully pull the cluster out, disconnect the wiring harness, and replace it with the new cluster. Reassemble everything by reconnecting the wiring, securing the cluster, and reinstalling the trim panel.
I may be mistaken, but I don't think you can change the gauges. I think I recall seeing here, that you must replace the entire instrument cluster.
Well, Pontiac didnt make a sunfire in 1994 is it a 95 sunfire or 94 sunbird?
where is the fuel filter located on a 2003 Pontiac sunfire
Um... change it into what? FriPilot
OK ... Here's the REAL answer: You cannot change the bearings on a Pontiac Sunfire. You must replace the "Hub-Assembly" they will be the same on both sides .
Which bulb, exactly?
To change the reverse lights on a Pontiac Sunfire you need to locate it on the left side of the transaxle. Then, unplug the electric connector and remove the switch along with the socket.
Pontiac didn't make the Sunfire until '95. So, either you have the year of your car wrong, or it might be a Sunbird. If you can clarify this for us, we can help you.
remove the trim panel around the instrument cluster then remove cluster. On the back of instrument cluster are the bulbs just turn them half a turn and they come right out.
You can replace a timing chain on a 2002 Pontiac Sunfire by visiting a local mechanic and having him take care of it for you. This is a tricky part to change yourself.
Remove the transmission oil pan
Take it out and put a new one in!