To remove the rear seat back in a 1992 Chrysler LeBaron Convertible, first, locate the retaining bolts at the bottom of the seat back; these are usually accessible from the trunk. Use a socket wrench to remove the bolts. Once the bolts are removed, gently pull the seat back upward and away from the seat base to detach it. Be cautious of any clips or connectors that may also need to be released.
Yes
The fuel pump on a 1992 Chrysler LeBaron is inside the fuel tank.
It is behind the rear seat.
in the trunk were the spar tire is
Remove door panel where switch is located. Remove itch. Use fine emery board nd clean points. It worked for me
Drivetrain.com has them for around $1230.75 Cost, $150.00 Core Charge. See Link. Hope This Helps.
Steel, aluminum, plastic, copper, brass, zinc, possibly leather, or other fabrics.
take it to a shop.. pay the 300 and its garaunteed.. its an involved process that the haynes doesnt show
Dry fill is almost nine quarts.
If it is the same as my 1991 Lebaron it is located just above the oil filter. You will have to take the oil filter off and the starter off to get to it.
On eBay there about $160 to $200 dependiing on if you need the rear window. You'll have to remove back seats to get at the complete convertible frame. The tops will come with instructions. Its a lot of work and very time consuming plan for a whole weekend.
Yes it will.