There's a pin in the knob on the side facing your dash, under the grip is a double sided pin that looks like a giant staple, remove that and it will come right off!
carefully pop out the shifter button then remove the snap ring
To install a shifter slider on a 1969 Pontiac Firebird, first, ensure the vehicle is in park and disconnect the battery for safety. Remove the center console and the existing shifter assembly to access the shifter mechanism. Install the new shifter slider by aligning it with the existing mounting points and securing it in place, ensuring all connections are tight. Finally, reassemble the console and reconnect the battery, testing the shifter's functionality before driving.
remove the entire dashboard.
To change the shifter handle on a 2006 Chevy Trailblazer, first, disconnect the negative battery cable for safety. Next, remove the trim surrounding the shifter by gently prying it off, then locate the retaining screw or clip that holds the shifter handle in place and remove it. Slide the shifter handle off the shaft, then install the new handle by reversing the process—attach it securely and replace the trim before reconnecting the battery.
you usually have to take apart the entire dash to get to it
Put it in park, pull the button off the shifter, it will come off without hurting anything, just has a clip inside. Next remove the snap ring inside the knob, and it pulls off.
3rd Gen also. Follow the directions for a 91 & 92.
well you can change the entire rear hatch with that of a trans am's but I dont think it would be worth the the money to convert the car into a trans am style car.
Considering that there is no such thing as a Ford Firebird, I would say its impossible. I'm guessing you're trying to say either a Ford Thunderbird or a Pontiac Firebird. And both are VERY different to take out
i wont to change my shifter but cant take off old one
To remove the heater from a 1967 Pontiac Firebird, first disconnect the battery and drain the cooling system. Then, remove the heater hoses from the heater core, followed by unscrewing the heater box from the firewall. Lastly, detach any electrical connections and remove the entire heater assembly from the vehicle. Make sure to keep track of any screws or clips for reinstallation.
You can replace the ignition lock cylinder in your 1994 Pontiac Firebird without removing the steering will. Remove the retaining ring at the top of the ignition cylinder. The ignition cylinder will slide out.