Remove 3 torque screws on inside of door. On newer models, and perhaps on yours, there is a hanger clip that prevents the mirror from falling (A nice feature). Remove both ends of electronic tube. Un-clip wire leading to mirror. Carefully pull through tube. Lift mirror to remove. :) Careful...don't scratch the paint!
To remove the driver side mirror on a Dodge Sprinter, first, carefully pry off the mirror cover to expose the mounting screws. Then, using a socket wrench, remove the screws holding the mirror in place. Disconnect the wiring harness if the mirror is powered, and finally, carefully pull the mirror away from the door. Make sure to replace it with caution to avoid damaging the door panel.
You will need to remove the inside door panel of your 2002 VW Jetta. Remove the wiring harness from the mirror. Remove the side view mirror retaining bolts. Reverse the process to install the new side view mirror.
If you need to remove side view mirror: you need to remove door panel and there should be 3 nuts securing mirror to door.
To replace the driver's side mirror on the 2003 GMC Envoy, first remove the interior door panel. Then, remove the mirror connection cover inside the panel as well. Unscrew the screws holding the mirror to the door. Remove the wiring and replace the mirror with a new mirror. Replace the screws and place the door panel back onto the door.
Remove the inside door panel of your Chevrolet Astro Van. Remove the wiring harness from the mirror. Remove the side mirror retaining bolts.
If you have an electric side mirror you have to remove the door panel then unplug the electrical connector and then remove the screws that hold the mirror.
Remove the inside door panel of your Chevy Cavalier. Remove the drivers side mirror wiring harness, if the mirror is electric. Remove the drivers side mirror retaining bolts. Reverse the process to install the new drivers side mirror.
You need to remove the door panel. Remove the wires going to the mirror. Remove the nuts holding the side mirror. Reinstall in reverse order.
you need to remove the door panel on the inside of the car and at the top of the door by the mirror you will see 2 bolts holding the mirror onto the door remove those bolts and the mirror will come off.
to replace the right side door mirror on the 1992 Chrysler New Yorker, first remove the interior door panel. Then, remove the access cover at the base of the mirror inside the door. Then, remove the three bolts and the wiring that holds the mirror in place. You can then attach the wiring to the new mirror and housing, and then bolt it into place on the door. Replace the access cover and the door panel.
You will need to remove the inside door panel in order to replace the side mirror. With the door panel removed you will find the side mirror is held in place by two retaining bolts. Remove the retaining bolts. Reverse the process to install the new side mirror.
Yes, you will have to remove the door panel. Go to this website. It will show how to remove the door panel and the side mirror. http://www.kwmuth.com/techsupport/pdfs/21000310.pdf