0
To remove the window cranks in a 1993 Chevy S10, first, you need to locate the small retaining clip that holds the crank in place. Use a flathead screwdriver to gently pry off the clip from behind the crank handle. Once the clip is removed, simply pull the crank off the window shaft. If there is a plastic cover, you may need to remove that as well, which can typically be done by gently prying it off.
What else can I help you with?
How do you remove the tailgate from a 1993 Chevy Blazer What if the window is broken out and the tailgate wont go down?
take it to a transmission shop
How do you replace driver side window in 1993 Chevy astro van?
How do i change the window on a 95 chevy astro van
1993 Chevy suburban cranks but will not start getting fuel but no spark why not?
I would replace the ignetion module that is in the distributor.
How do you remove the interior door panel from a 1993 Chevy Silverado?
General Chevy info, remove door hande bezel, remove armrest, remove window crank if it has manual windows.(there is a clip on the crank) Start at the bottom and gently pry panel up pulling plasic clips out of holes in door. When panel is loose it will lift off of window ledge. If you have power windows or locks you will have to unplug the switches carefully
How do you replace the window switch on a 1993 325i?
Remove the decorative cover to the window switch panel. Remove the window switch retaining screws. Remove the wiring harness from the back of the window switch. Reverse the process to install the new window switch.
How to replace alternator in 1993 Chevy G20?
Remove the belt from your 1993 Chevy G 20 alternator. Remove the alternator wiring harness. Remove the retaining bolts from the alternator. Reverse the process to install the new alternator.
How do you change fuel pump on 1993 Chevy truck?
Remove the fuel tank or remove the bed.
How do you remove a window motor from a 1993 Chevrolet 1500 pickup?
you have to drill out the rivets
How do you replace the starter on a 1993 Chevy Cheyenne?
Remove the positive battery cable from your 1993 Chevy Cheyenne battery. Remove the two cables from the front of the starter. Remove the three starter retaining bolts. Reverse the process to install the new starter.
How do you remove headrest from 1993 Chevrolet Corsica?
how to remove headrest of 95 chevy corsica without tabs
How do you remove front coil springs on 1993 G20 Chevy van?
ejaculate on them
How do you install a starter on a 1993 Chevy Corsica?
Begin by removing the positive cable from your 1993 Chevy Corsica battery. Remove the cables on the front of the starter. Remove the starter retaining bolts. Reverse the process to install your new starter.
