The 2007 Jeep Liberty has the most common hook-end wiper arms. See sources and related links below for installation videos. Also, purchase the replacement blades first and there will be additional instructions/illustrations on the replacement packages. Locate and press the tab or button where the wiper blade is inserted into the hook of the wiper arm and pull wiper blade out of hook. You may have to rotate and flex the blade to make enough clearance for the hook to pass through.
To remove a windshield wiper from a Mercedes-Benz 180, first, lift the wiper arm away from the windshield. Look for a small tab or lever on the wiper blade where it attaches to the arm; press this tab while sliding the wiper blade downwards to detach it from the arm. Once it's loose, you can fully remove the wiper blade. Repeat the process for the other wiper if needed.
To remove the wiper blade on a 2001 Saturn L200, first lift the wiper arm away from the windshield. Locate the small tab or lever where the wiper blade connects to the arm, press or pull it to release the blade. Slide the blade off the wiper arm, and then simply attach the new blade by sliding it onto the arm until it clicks into place. Lower the wiper arm back onto the windshield once the new blade is secured.
To remove the windshield wipers from a 1989 Dodge van, first ensure the wipers are in the "off" position. Lift the wiper arms away from the windshield, then locate the small tab or clip on the underside of the wiper blade where it connects to the arm. Press or lift this tab to release the blade from the arm, then slide the blade off. Repeat the process for the other wiper blade.
To change the driver wiper blade on a Toyota Matrix, lift the wiper arm away from the windshield. Press the small tab on the underside of the wiper blade where it connects to the arm and slide the blade downwards to remove it. Align the new wiper blade with the arm and slide it up until it clicks into place. Finally, gently lower the wiper arm back onto the windshield.
The 2009 Jeep Grand Cherokee has standard hook-end wiper attachments on the front and a fairly specialized pinch tab rear wiper arm attachment. See sources and related links below to view wiper blade installation videos and for information on the special rear wiper blade.
Not sure what you mean by "windshield wiper cover," however if you're asking how to remove the rubber blade from the plastic frame - be careful. The end caps do come off but its not recommended. I recommend simply replacing the entire wiper blade. See videos on link below.
To remove the windshield wipers on a 2007 Scion tC, first lift the wiper arm away from the windshield. Locate the small tab on the underside of the wiper blade where it connects to the arm, press this tab, and slide the blade downwards to detach it from the arm. Repeat this process for the other wiper blade. Once both blades are removed, you can replace them with new ones if needed.
The wiper blade misses the windshield in the middle of the wipe. Is there an adjustment for that ? I have replaced the wiper to no avail.
The 2002 Jeep Liberty rear wiper blade is unique to Jeep. You'll probably have to get the part at the dealer and may be able to ask for the install procedure.
To remove the windshield wipers on a 2009 Subaru Forester, first, lift the wiper arms away from the windshield to a vertical position. Locate the small tab or lever on the underside of the wiper blade where it attaches to the arm, press it down, and slide the blade off the arm. Repeat the process for the other wiper. Finally, lower the wiper arms back to their resting position.
Lift wiper assembly off of windshield into "up" position. Rotate 90 degrees. Pull wiper blade assembly gently toward the windshield. It slips right off. Note: Put protective barrier like cardboard or a towel over windshield in case blade assembly snaps back toward windshield to avoid cracking the windshield.
To replace a windshield wiper motor for a 1998 F150, first remove the bottom trim on the window. Then remove both wiper blade assemblies and all screws on the metal cowling. Remove the retaining clip from the wiper motor linkage and pull the controls rods off.