Lift the arm slightly. Look at where it connects to the body. See the tiny tab on the top? Pull it out with a screwdriver and the entire thing should come off the spline shaft.
remove the caps at the end of the wiper arms. Unscrew the nut holding down the arm and it should come off.
remove the cowl & wiper arms (mark location of arms on the windshield). disconnect the battery, Disconnect wire connector at wiper motor & remove the 4 mounting bolts then remove the linkage from motor.
To remove the wiper arm assembly from a 1993 Mercedes 190E, first, lift the wiper arms away from the windshield. Then, locate and remove the nut securing each wiper arm to the pivot post using a socket wrench. Once the nuts are removed, gently wiggle the wiper arms to loosen them from the post. Finally, pull the wiper arms straight off the pivot posts to complete the removal.
# Remove the windshield wiper arms # Remove the cowl cover # Disconnect the electrical connector from the wiper motor # Detach the wiper motor/linkage assembly from the cowl # Remove the wiper motor retaining bolts and remove the motor
http://letmegooglethatforyou.com/?q=how+to+remove+wiper+arms
It is under the cowl at the base of the windshield. You will have to remove the wiper arms and the cowl cover to access.
At the base of the wiper arm is a small "pin" sticking out. Pull this pin outward to release the entire wiper arm. Reinstall by pushing the pin in.
To change the wiper bushing on a 1986 Dodge D-150 truck, first, lift the wiper arms away from the windshield and remove the nuts securing the wiper arms using a socket wrench. Once the arms are off, detach the wiper motor cover to access the wiper linkage. Replace the old bushing with a new one, ensuring it fits snugly, then reassemble by reversing the steps: reattach the wiper motor cover and wiper arms, and secure them with the nuts. Finally, test the wipers to ensure they function properly.
The wipers are connected to the wiper motor by a system of arms and swivel joints. The wiper arm itself may be loos from the connecting rod or a joint in the system may have come loose. you can remove the cowling to get access to the arms.
To remove the wiper arms from a 1996 Concord, remove the small clip holding them on. Then pull up on the arm.
You will have to remove the wiper arms, then remove the cowl, and then the wiper motor.
How do you remove the wiper arms on 2001 Lincoln LS