http://letmegooglethatforyou.com/?q=how+to+remove+wiper+arms
Remove wiper arm caps, nuts & arms. Remove cowl louver cover. Disconnect wiper motor electrical connector. Remove 6 bolts and remove wiper linkage assembly. Disconnect wiper link from wiper motor. Remove 4 screws and wiper motor from firewall.
To replace a wiper motor on a 1994 Toyota Corolla, remove the rubber stopper that cover the hardware attached to the wiper arms. Then grab the wiper arm and jiggle it back and forth until it comes off. Remove the old one and slip the new one on.
The Toyota Echo has the most common hook-end wiper arms. See sources and related links below for installation videos. Also, purchase the replacement blades first and there will be additional instructions/illustrations on the replacement packages. Locate and press the tab or button where the wiper blade is inserted into the hook of the wiper arm and pull wiper blade out of hook. You may have to rotate and flex the blade to make enough clearance for the hook to pass through.
To remove the wiper arms from a 1996 Concord, remove the small clip holding them on. Then pull up on the arm.
You will have to remove the wiper arms, then remove the cowl, and then the wiper motor.
How do you remove the wiper arms on 2001 Lincoln LS
how do you remove the wiper arms on a 2002 CRV?
remove wiper arms and cowl
From a Toyota dealer. Not available from auto parts stores.
To remove the wiper arms from a 1971 Nova, start by lifting the wiper arms away from the windshield to access the mounting nuts. Use a socket wrench to remove the nut that secures each wiper arm to the pivot shaft. Once the nuts are removed, gently lift the wiper arms straight off the shafts. If the arms are stuck, you may need to use a wiper arm puller for extra leverage.
To replace the windshield wiper motor on a 1989 Toyota pickup, first disconnect the battery to ensure safety. Remove the wiper arms by unscrewing the nuts at their bases and gently pulling them off. Then, remove the screws or bolts securing the wiper motor to the firewall, disconnect the electrical connector, and take out the old motor. Install the new motor by reversing these steps, ensuring all connections are secure before reassembling the wiper arms.
bang the joint (where the arm pivots) with your palm. this will free it from the tapered shaft.