i recently had to replace the passenger side mirror of my 93 blazer, at first i attempted to fix the white mirror mounts behind the glass, but they wouldn't sit right after some frustration i decided to go to the junk yard and pay $10 for a new power mirror, this is most likely ur best bet
need more information. are you talking mirror assembly repacment?? or motor not running?
To repair the driver's side mirror on a 2003 Mazda, first, carefully remove any broken mirror glass and the mirror housing if necessary. Use a flathead screwdriver to pry off the plastic cover, then unscrew the mounting bolts to detach the mirror assembly. Replace it with a new mirror or glass, reattach the assembly, and secure it with screws. Finally, snap the plastic cover back into place and ensure the mirror is aligned correctly.
Mirror Repair was created in 1995.
To repair a Toyota Sienna driver side mirror that won't stay in position, first, inspect the mirror assembly for any loose screws or damaged components. Tighten any loose screws, and if the mirror still won't hold its position, check the mirror adjustment mechanism for wear or breakage. If necessary, replace the adjustment assembly or the entire mirror housing. Finally, ensure that the mirror is properly aligned and securely attached to the vehicle.
form_title=Mirror Repair form_header=9923 What do you need done to repair your mirror?*= () Mirror is broken () Mirror needs to be resilvered () Other Which of the following best describes the mirror in need of repair?*= [] Beveled edge [] Eased edge [] Glued to wall [] Clip mount [] Channel mount [] Framed
* Remove the door trim panel * On power mirrors unplug the electrical connector * Remove the triangular cover over the mirror mounting * Remove the bolts and detach the mirror from the door * Installation is the reverse of removal
rub it
You can repair a bad ding in your passenger side mirror casing by replacing the passenger side mirror casing. An auto body repair expert can usually repair the original mirror casing, but it will be more expensive than buying the new casing.
The answer to this depends on exactly what you are going to repair.
my Chevy blazer power seat on my 1996 Chevy blazer isn't working
take the screws out of the door hanle to separate the inside door molding from the body then just pull he door molding off from multiple locations in a pattern around it.
(1)Remove the door trim panel; (2)disconnect the electrical connector for the power mirror (3) where necessary, lower the window for access to the mirror mounting nuts (4)remove the mounting nuts and take the mirror out. - Haynes Ford Ranger Pickups Repair manual