In most cases wheel bearings cannot be repaired and must be replaced. Remove the tire and wheel. Remove the axle end cap. Remove the wheel bearing seal. Remove the wheel bearings. Reverse the process to install the new wheel bearings.
Replacing a wheel bearing in your Chevrolet blazer will cost approximately $175 per bearing. You can save $125 by doing the work yourself.
It depends what year they are and if they are 2 wheel drive or 4 wheel drive.
Call your local auto parts store. Front wheel bearings can go from $50 to $200 (plus labor) depending on manufacture.
It is not recommended that you replace the wheel bearings on your Hyundai Accent by yourself. Rather you should take the vehicle to a repair shop or to the dealer where you bought the vehicle for servicing.
2 wheel drive, yes. 4 wheel drive, no.
I purchased the bearings and had my repair man do it. Very reasonable about $200
Find it yourself lazy!
It has 1 big hub bearing per side and you can not service them. It has factory sealed bearings. If there bad then you must replace the bearing.
Change them. They are not serviceable.
The Lancer does have wheel bearings on the front. If you would like to find them yourself, go to www.mitsubishiparts.com. The Lancer does have wheel bearings on the front. If you would like to find them yourself, go to www.mitsubishiparts.com.
Check wheel bearings.
You can't replace just the wheel bearings. You have to replace the whole hub assembly. Costs about 200 bucks per wheel at a repair shop. I have had both of mine replaced.