4 sheet metal screws on top and pry out and in and it should pop out.
WHERE DO YOU GET A REPLACEMENT IN DASH PUSH IN CUP HOLDER FOR THE 2001 S40 VOLVO? FIRST :) I already have the new cup holder from Volvo! How do I replace it? You have the actual guestion listed, now where do I find the answer????
How do you replace cup holder in a 2000 Lexus ES300
The cup holder in a Dodge Ram has four bolts, and two bolts above those bolts. You will need to unscrew all six bolts and then the cup holder drops off.
Open the cup holder and remove the two screws on the outside.
I cannot find how to remove the cup holder from the dash of my 2001 Pontiac Montana
The cup holder may snap out depending on which one it is. If the cup holder is a flip out style from the center arm rest then in has small ears that hold it in.
To replace the rear cup holder in a 2005 Equinox, start by removing the trim panel that surrounds the cup holder; this usually involves prying it off gently with a flat tool. Once the trim is off, unscrew any screws holding the cup holder in place and disconnect any wiring if applicable. Replace it with the new cup holder, secure it with screws, and reattach the trim panel. Finally, ensure everything is aligned properly and test the cup holder for proper function.
Take it out
You have to replace it.
Pull the cup holder out as far as it will go. Pull up on the seat upholstery right above the cup holder so you can see the very back of the cup holder. There is a tab there. Push down on the tab while pulling out on the cup holder and it will slide right out. Reinstall by lining up in the slide rails and push it back in.
The best way is to just get a new cup holder to put in between the seats. If this does not work, then you can get a replacement part.
It doesn't have a real ashtray. Dodge sells a ashtray insert for the cup holder instead.