Check heatertreater.net for diagnostic information and a fix for the blend door/actuator problems endemic to this model.
how hard is it to replace the blending door
To find and replace the climate control actuator on a 2003 GMC Envoy, first, locate the actuator, which is usually situated behind the dashboard near the heater core. Remove the necessary panels and screws to access the actuator. Disconnect the electrical connector and unbolt the actuator from its mount. Replace it with a new actuator, reassemble the components, and ensure everything is securely fastened before testing the climate control system.
heater door actuator for Ford Explorer.
To replace the heater door actuator in a 2002 Ford F-150, start by disconnecting the negative battery cable to ensure safety. Remove the dashboard trim and any panels necessary to access the actuator, typically located behind the dashboard near the heater core. Disconnect the electrical connector from the actuator, unbolt it from its mounting location, and replace it with the new actuator. Reassemble the dashboard components, reconnect the battery, and test the heater controls to ensure proper function.
bs
My 2004 ford explorer there isn't any vacum from the present heater control valve and the blower has been replace and the themostat has been replace and there is a clicking behind the a/c unit
To fix the heater flap in a 2001 Daewoo Nubira, first, remove the dashboard panels to access the heater control assembly. Check the actuator, as it may be faulty; replace it if necessary. Ensure that the linkage connecting the actuator to the flap is intact and properly aligned. If the flap itself is broken, you may need to replace it or repair any damaged components.
To replace the heater actuator on a 1991 Oldsmobile Silhouette, first, disconnect the negative battery terminal for safety. Then, remove the dashboard panels and any necessary components to access the actuator, which is typically located behind the dashboard near the heater core. Disconnect the electrical connector and remove the screws holding the actuator in place. Install the new actuator by reversing the steps, ensuring everything is securely fastened before reassembling the dashboard.
The heater matrix can be replaced by removing the heater core and temperature control cables. Replace the heater core and the control cables.
The temperature actuator motor controls the flow of air through the heater core. The motor is located under the driver's side dash, above the transmission tunnel. It's a little difficult to get to, but not bad. Check heatertreater.net for pictures and what to check for on the actuator motor.
To replace the heater vent air door actuator on a 1995 Ford Taurus station wagon, first, disconnect the negative battery cable for safety. Then, remove the necessary dashboard panels and the center console to access the actuator, which is located near the heater core. Disconnect the actuator's electrical connector and remove the mounting screws to take out the old actuator. Install the new actuator by reversing the process, ensuring it's properly aligned and securely fastened before reassembling the dashboard.
Unfortunately the entire dash must come out to replace that unit.