To replace the water pump on a 1996 Geo Prism, start by disconnecting the negative battery cable and draining the coolant. Remove the serpentine belt, then unbolt and take out the water pump from the engine block. After replacing the water pump, reattach the radiator hose, ensuring a secure fit. Finally, refill the cooling system with coolant, reattach the battery cable, and check for leaks.
replace your radiator cap...
how to replace a radiator in a 1996 buick regal
ck
You don't fix it you replace it. Drain the radiator, replace the hose, and the thermostat, flush the system, install a 50/50 mixture of antifreeze and water, bleed the system.
In front of the radiator between the grill and the radiator
Remove the bottom radiator hose on your 1996 Chevy Lumina radiator. Put a water hose in the top of the radiator. Allow the water hose to run until the water draining from the bottom of the radiator runs clear.
Drain the old one, disconnect the transmission lines, undo the radiator hoses and bolts holding it in an pull it straight up.
Should be at the engine end of the upper radiator hose
follow the lower radiator hose from the radiator to the water pump
Follow the lower radiator hose from the radiator , it connects to the water pump
broken water hose, radiator
you have to drain the antifreeze/coolant so it would be wise.