Blower Motor Removal & Installation With Air Conditioning 1. Disconnect the battery ground. > On trucks built for sale in California, remove the emission module located in front of the blower. 2. Disconnect the blower motor wiring at the blower. 3. Disconnect the cooling tube at the blower. 4. Remove the 4 mounting screws and pull the motor from the housing. To Install 5. Remove the clamp from the blower case and remove the blower cage. Mount the cage on the replacement motor. 6. Install the blower motor and tighten the 4 mounting screws. 7. Connect the cooling tube and wiring hardness. 8. Connect the negative battery cable. Check the blower motor for proper operation. 9. Cement the cooling tube on the nipple at the housing using Liquid Butyl Sealer D9AZ-19554-A, or equivalent.
where is the blower motor on a 2001 chevy blazer
Location of blower fan on 2001 blazer
search up the diagram
The bearings are out of it. Replace Blower motor.
Check to see if you are getting power to blower motor - if so replace blower motor If not check fuse, switch, resistor pack.
To replace a blower motor on the resistor first you take off the nozzle and then you go into the motor through the nozzle and unlock it then repeat and oil and done.
To replace the blower motor on a 2001 Hyundai XG300, first disconnect the negative battery terminal. Then, remove the lower dashboard panel to access the blower motor, which is located behind the glove compartment. Disconnect the wiring harness and unscrew the motor from its housing. Finally, install the new blower motor, reattach the wiring, and replace the dashboard panel before reconnecting the battery.
To replace the blower motor on a 2001 Mitsubishi Eclipse, first disconnect the negative battery cable to ensure safety. Remove the blower motor cover and unplug the electrical connector from the motor. Unscrew the mounting screws holding the blower motor in place, then carefully pull it out. Install the new blower motor by reversing these steps, ensuring all connections are secure before reconnecting the battery.
The resister for the 2001 prism blower motor drops voltage to the blower motor. This is how the blower motor runs at a lower speed.
You need to replace blower motor resistor.
replace the blower motor resistor
you have waisted my time, thank you