The question you ask is too involved for a proper answer. You need to go to a car parts store, and get a repair manual for your car. They cost about $16.00 Or, go to a Public Library.
The most common reason for a speedometer to fail is a broken speedometer cable. Loosen the nuts on each end of the speedometer cable. Remove the speedometer cable retaining clips. Reverse the process to install the new speedometer cable.
To repair the speedometer cable on a 1992 Ford Tempo, first, disconnect the negative battery terminal for safety. Locate the speedometer cable at the back of the speedometer and the transmission; detach it from both ends by unscrewing the retaining nuts. Inspect the cable for any breaks or fraying; if damaged, replace it with a new cable. Finally, reattach the cable, ensuring it is securely fastened, and reconnect the battery.
If the speedometer is not working it probably needs a new speedometer cable. If the speedometer is actually broken either take it to as speedometer repair shop or replace it.
you may have a broken speedometer cable. you may have a broken speedometer cable.
Speedometer cable replace 1989 toyota
To replace the speedometer cable on a 1993 Ford Tempo, start by disconnecting the negative battery terminal for safety. Next, remove the instrument panel by unscrewing it and pulling it out gently. Locate the speedometer cable at the back of the speedometer, disconnect it, and then trace it down to the transmission, where you’ll need to unscrew and remove the cable from there as well. Install the new cable by reversing the process, ensuring it’s securely connected at both ends, and then reassemble the instrument panel.
if it's the speedometer cable you just unhook the cable from in back of the speedometer head in the dash by unscrewing it and taking it off and on the transmission it also unscrews and then just pull the complete cable out and replace with a new cable.
If it is the gauge you have to pull the gauge cluster. If it is the cable you have to get under the car and replace it. It will be the only cable on the tranny. Good luck
firstly you find the part off the speedo cable that's broken and then you replace it with a new part then you speedometer will work
Disconnect speedometer cable from back of speedometer gauge by twisting the threaded collar to unscrew. Then just slide the old cable out of cable housing and insert new one. If cable is broken you may need to disconnect cable from transmission tail shaft to remove part of the cable. Cable must be inserted into the gauge end of the cable housing.
The speedometer is electronic on a 1999 Ram, and does not have a cable.
There is no speedometer cable on that vehicle. The speedometer is driven electronically.