BIG JOB! The original hinges are welded in. They do sell pin and bushing kits to restore the original hinges, much easier to do than replacing the whole hinge.
http://www.bodyshopzone.com/archives/mechanical/door/hinge/pin_replace_1.html
Replace the hinge pins and bushings.
To replace the fuel door hinge on a 2005 Chevy Malibu, first, open the fuel door and locate the hinge. Remove the old hinge by unscrewing any screws or bolts that secure it to the body. Align the new hinge in place, then secure it with the screws or bolts. Finally, test the fuel door to ensure it opens and closes properly.
I need passenger door hinges for my chevy aveo 2007
To replace the gas door on a 2002 Chevy Trailblazer, first, remove the broken or damaged gas door by gently prying it off its hinge or undoing any clips holding it in place. Next, align the new gas door with the hinge and press it into place until it clicks securely. Ensure that it opens and closes smoothly. If necessary, check the spring mechanism to ensure proper functionality before finishing the installation.
Replace the worn door hinge pins and bushings and the door should line up where it belongs. The pin and bushing kits are available from your local auto parts store.
To replace the driver's door hinge pins on a 2003 Chevy Express van, first, support the door to prevent it from falling. Remove the hinge cover and then use a hammer and punch to drive out the old hinge pins. Once the pins are removed, insert the new hinge pins and secure them in place. Finally, test the door's movement and reattach any removed components.
Your local auto parts store can sell you an inexpensive tool to remove and replace that door detente spring. Other hinge parts such as the pin and roller for the door detente and hinge pins and bushings are also available.
To replace the gas tank door on a 2002 Grand Prix, first, open the gas door and remove any screws or clips securing it in place. If the door is attached with a hinge, carefully detach it from that hinge. Once removed, align the new gas door with the hinge or mounting points and secure it in place with screws or clips. Finally, test the door to ensure it opens and closes properly.
I found an excellent web page that walks you through this step by step: http://bodyshopzone.com/archives/mechanical/door/hinge/pin_replace_1.html
To replace the rear door hinge pins on a 2001 Chevy Express cargo van, start by supporting the door with a jack or a sturdy object to prevent it from falling. Remove the hinge cover if present, then use a hammer and punch to drive out the old hinge pins from the top and bottom hinges. Insert the new hinge pins, ensuring they are seated properly, and reattach any covers. Finally, test the door movement to ensure it opens and closes smoothly.
To fix a door hinge, you can tighten the screws on the hinge or replace them if they are stripped. You can also lubricate the hinge with oil or grease to reduce friction. If the hinge is damaged, you may need to replace it with a new one.