This is an easy one, but.... I spent a good half an hour figuring it out. The license plate lamp requires no tools to replace. Above the license plate is a small bulb housing. At the back of the bulb housing is the bulb socket that locks into place. Simply turn the socket 90 degrees moving the socket clockwise as you're facing the rear of the car and wiggle it out. The bulb simply pulls out and the new one pushes in!
The ECU on a 1993 Cadillac Deville is behind the glove box. To remove the ECU, remove the bolt and pull down the plate.
behind licence plate
To change the license plate bulb in a 2001 Cadillac DeVille DTS, start by opening the trunk and locating the license plate light assembly. Carefully pry off the light cover using a flathead screwdriver or similar tool. Remove the old bulb by twisting it counterclockwise and replace it with a new bulb, ensuring it’s securely in place. Finally, snap the cover back on and test the light to ensure it's working.
how do you replace a honda crv licence plate bulb on a 2004
Drop the fuel tank. Remove the fuel pump and sending unit assy. This is incorrect, the 2000 up deville has an access plate in the trunk, pull out the mat and it will be obvious you can change full sending unit and pump through it.
Take it to a Buick Dealership
pop your hood and find the what "FUSE PANEL" find the fuse marked Parking lights and replace it. Its that simple. it might not be a fuse have you replaced the bulb or checked your contacts from your wiring?
my name is Jesse fondotsto replace a license plate light you first have to open the trunk of the car take out the carpet on the top of the trunk after that you will see two little black screws you take them out after you do that the silver peice will come off but before you can replace it you must take the two little screws out that are located right above the license plate. your welcome!
who owns vehicle with licence plate ABN 4886
pop out the light assembly with a screwdriver and change the bulb. your receptacle may be taking in water at the car wash. duct tape over lens before going through automatic car wash.
what is the number for the fuse to change the rear license plate light. and is it the fuse box under the back seat or under the hood? The plate light is protected by the parking/tail light circuit.
you cam in the back you just gotta get something custom done to the front the strut plate is in they way