To replace a passenger window in a 1987 Jeep Comanche, start by removing the door panel to access the window mechanism. Carefully disconnect any wiring and remove the old glass by unscrewing any brackets or clips holding it in place. Slide the new window into the track and secure it with the brackets or clips. Finally, reassemble the door panel and test the window operation.
replace 1987 dodge pickup/power window motor
you have to pull the transmission
no
.34 - .37 is optimal any more than that you'll have to replace them more often.
remove from in side pushing out with pry bars and an smallrope pasents jental
To replace the radiator in a 1987 Jeep Comanche, first, drain the coolant by opening the petcock at the bottom of the radiator. Disconnect the hoses, electrical connectors, and any mounting bolts securing the radiator in place. Remove the old radiator and install the new one, ensuring it aligns properly with the mounts. Reconnect the hoses and electrical connections, then refill the cooling system with new coolant and check for leaks.
remove the seat replace the wire(s) that engage the locking slider replace the slide bearing IAEFs, replace the seat
To replace the rear side window in a 1987 Cadillac Fleetwood Brougham, first remove the interior door panel by unscrewing or unclipping it to access the window assembly. Carefully detach the old window by removing any clips or screws holding it in place. Install the new window by sliding it into the window track and securing it with the clips or screws. Finally, reattach the door panel and ensure everything is aligned and functioning properly.
10w30
common probem with the 190e class vehicles. he problem is he motor and regulator assembly. find a used one in the wrecking yard and replace the complete assembly with cable regulator and motor. good luck
It should be right behind the grill. It is on a 1986.
Are they drum? If so they need to be cleaned and adjusted. Ensure there are no leaks.