answersLogoWhite

0

Locate the idler spring tension pully below the Power Steering pump. The pully is pressing down on the belt and has to be pulled away from the belt so you can remove belt from the power steering or alternator pully. You need a socket that fits the bolt on the tension pully and a socket wrench with a 2 to 3 foot pipe extension. Attach to bolt head, apply counter clockwise pressure enought to loosen belt to allow enough slack to remove belt. Do not get your fingers between the belt and any pully when removing. You might not like it. To reinstall. Route the belt and release the tension again enough to put the belt back on the last pully.

User Avatar

Wiki User

17y ago

What else can I help you with?