All you have to do is go under on the lower right side of your motor. Make sure you disconnect your battery first. Now you will see two bolts holding the starter in place and three wires attached to the solenoid on the top. After you remove the two bolts, you will be able to move your starter forward and out enough to undo those nuts holding the wires and your done
a rebuilt starter is about $60.
How can do I replace a water pump on a 96 camaro z28
mounted on top of the starter.
Yes
direct bolt in fit.. only differences may be in wire connections.. but that to can be changed
1970-1981
The starter is underneath the car on the passenger side. The flywheel is in the transmission bellhousing.
On the left side of the engine above the oil pan
305 - 165, 350 - 190
What about the timming
If it is the 5.7L 350 V8, then it has 175 Horsepower
To remove the starter from a 1979 Camaro Z28, first disconnect the negative battery cable to ensure safety. Then, locate the starter, which is typically mounted on the passenger side of the engine. Remove the electrical connections from the starter solenoid and then unbolt the starter from its mounting brackets. Carefully pull the starter out from its position, ensuring to maneuver it around any obstacles.