To replace the steering column in a 1997 Ford Aspire, first disconnect the battery to ensure safety. Remove the steering wheel by taking off the center cap and unscrewing the retaining nut. Next, detach the lower steering column cover and disconnect any wiring harnesses, then unbolt the column from the dashboard and chassis. Finally, install the new column by reversing these steps, ensuring all connections and bolts are secure.
this site^ will show you a how
Its a common problem with the 95 to 99 Chevy tahoes. Theres a sensor by the steering colunm that goes bad. go to this forum with all the info. www.automotivehelper.com/topic317059.htm
fdgf
NO!
Search Wiki for 1998 Chevy Suburban power steering pump replacement, the author based his answer on a 1997. Enjoy
In the 1997 Ford Aspire, the ignition switch is typically located on the steering column. You can access it by removing the steering column cover, which is secured by screws. The ignition switch is mounted near the base of the steering column, where the ignition key is inserted. Always ensure the vehicle is off and the battery is disconnected before attempting any work in that area.
How to replace a power steering pump on a 97' GMC sierra 1500
around 111.75
If you are lucky tie rod (inner or outer) has to be replaced. If you are not lucky you will have to replace all steering mechanism (steering rack).
I'm trying to find where the dip stick for transmission fluid on a 1997 Ford aspire is located
how do you change the engine oil and oil filter on a 96 ford aspire
It's possible a seal has broken. Find where it leaks from, could be pump, hose or steering ram. Then replace part.