0
To replace the tensioner pulley on a 2000 Oldsmobile Intrigue, first, disconnect the negative battery terminal for safety. Then, use a wrench or socket to relieve tension on the serpentine belt by turning the tensioner pulley counterclockwise. Remove the old tensioner pulley by unbolting it and then install the new pulley in its place, securing it with bolts. Finally, reattach the serpentine belt, ensuring it's properly aligned, and reconnect the battery terminal.
What else can I help you with?
How do you replace the tensioner pully on an Oldsmobile 88?
To replace the tensioner pulley on an Oldsmobile 88, first, disconnect the negative battery cable to ensure safety. Then, locate the tensioner assembly and use a wrench to relieve tension on the serpentine belt before removing it. Next, unbolt the old tensioner pulley from the assembly, replace it with the new pulley, and reassemble by reversing the steps. Finally, reattach the serpentine belt and reconnect the battery cable.
How do you replace belt tensioner 06 G6?
Begin by removing the serpentine belt from your Oldsmobile Cutlass. Remove the tensioner pulley retaining bolt. The retaining bolt will be in the center of the pulley. Reverse the process to install your new belt tensioner.
Installing belts in 99 Oldsmobile Cutlass?
Begin by loosening the tensioner pulley on your 1999 Oldsmobile Cutlass. Put your serpentine belt around the pulleys. Tighten the serpentine belt with the tensioner pulley.
How do you replace idler pulley on 1998 Oldsmobile intrigue?
the bolt comes out with the oposite lefty tighty and righty loossey. over righty tighty and lefty loosey
How do you put a pulley on a tensioner in a 1998 dodge caravan?
You have to unscrew the tensioner bolt and remove the serpentine belt first, then change the pulley and replace the belt.You have to unscrew the tensioner bolt and remove the serpentine belt first, then change the pulley and replace the belt.
How do you replace the idler pulley on 1997 Northstar V8 in Oldsmobile aurora?
To replace the idler pulley on a 1997 Oldsmobile Aurora with a Northstar V8 engine, first, disconnect the negative battery cable. Remove the serpentine belt by using a wrench on the tensioner pulley to relieve tension. Then, unbolt the old idler pulley from its mounting bracket and replace it with the new pulley, ensuring it’s securely fastened. Finally, re-install the serpentine belt and reconnect the battery cable.
How do you replace the belt tensioner on your 1989 Oldsmobile delta 88?
Move the tensioner to release belt (use bolt in center of pulley and move with socket) Then simply remove bolts from block. Reverse to put on new one.
How do you replace an air conditioning belt on an Avalanche?
You will need to loosen the tensioner pulley. When the tensioner pulley is loose the air conditioning compressor belt will become loose. Put the new belt on and tighten the tensioner pulley.
Do you need a serpentine tool for a Oldsmobile intrigue?
I actually have a 1998 Oldsmobile Intrigue with the 3.8 and just recently changed the serpentine belt all u need is a wrench to twist the tensioner pulley to release tension to slide the belt on to the pulleys other than that no equipment is needed if u have following questions send me an email to mr.blique@yahoo.com i hope this is the answer u were looking for
How do you replace tensioner pulley on 1995 Cadillac Seville sts?
To replace the tensioner pulley on a 1995 Cadillac Seville STS, first, disconnect the negative battery terminal to ensure safety. Then, use a wrench to relieve the tension on the serpentine belt and remove it from the tensioner pulley. Remove the bolts securing the tensioner pulley to the bracket, replace the old pulley with the new one, and reassemble by reversing the steps. Finally, reattach the serpentine belt and reconnect the battery terminal.
How do you replace tensioner pulley on Mercedes Benz 190E?
To replace the tensioner pulley on a Mercedes Benz 190E, first, disconnect the negative battery terminal for safety. Then, relieve the tension on the serpentine belt using a wrench on the tensioner arm and remove the belt. Next, unbolt the old tensioner pulley from its mounting bracket and replace it with the new pulley. Finally, reinstall the serpentine belt, ensuring proper routing, and reconnect the battery.
How do you remove the belt tensioner on a 1994 Oldsmobile delta 88?
To remove the belt tensioner on a 1994 Oldsmobile Delta 88, first, ensure the engine is off and cool. Use a wrench or socket to rotate the tensioner pulley counterclockwise to relieve tension on the serpentine belt, then slide the belt off the tensioner. Remove the mounting bolts securing the tensioner to the engine and take the tensioner off. Finally, replace it with a new tensioner, reattach the mounting bolts, and reinstall the serpentine belt.
