0
What else can I help you with?
How do you remove the belt tensioner on a 1994 Oldsmobile delta 88?
To remove the belt tensioner on a 1994 Oldsmobile Delta 88, first, ensure the engine is off and cool. Use a wrench or socket to rotate the tensioner pulley counterclockwise to relieve tension on the serpentine belt, then slide the belt off the tensioner. Remove the mounting bolts securing the tensioner to the engine and take the tensioner off. Finally, replace it with a new tensioner, reattach the mounting bolts, and reinstall the serpentine belt.
How do you replace the belt tensioner on your 1989 Oldsmobile delta 88?
Move the tensioner to release belt (use bolt in center of pulley and move with socket) Then simply remove bolts from block. Reverse to put on new one.
How do you replace a timing chain on a 1998 Oldsmobile delta 88?
How to change a timing chain in a 1998 Oldsmobile delta 88
How do you replace a transmission seal on 1985 Oldsmobile delta 88?
You gotta use tools.
How do you locate the fuel filter and how do you replace it on a 1992 Oldsmobile 88?
Behind the driver, under the vehicle.
Is the belt tensioner pulley on a 1998 olds 88 reverse threaded?
No, the belt tensioner pulley on a 1998 Oldsmobile 88 is not reverse threaded. It typically has a standard right-hand thread for the bolt securing it. If you're replacing or adjusting the tensioner, ensure you turn the bolt counterclockwise to loosen it. Always refer to a service manual for specific details and torque specifications for your vehicle.
How do you replace the lock cylinder in a 97 Oldsmobile 88 LS or how to override the pass key system?
go to a mechanic?
How do you change the timing belt on a 88 subaru justy 1.2 liter?
Follow these steps 1. Remove Timing belt & Crank Puly. 2. Remove Timing belt cover. 3. Remove Tensioner and its spring & Remove / Replace timing Belt 4. Align Timing Marks as Carnk pully below and Cam Pully to top Mark. 5. Assemble all parts and Enjoy. Regards Ehsan ehsanwah@yahoo.com
What is a possible reason for no heat in 1998 Oldsmobile 88?
The heater core may be stopped up. Try flushing it, or replace it.
What number is the fuse for turn signals on a 1994 Oldsmobile 88?
On my 1993 Oldsmobile 88, it is number "8"
Where is the starter relay located on the 1996 Oldsmobile 88?
Where is the starter relay located on the 1996 Oldsmobile 88?
Replacing water pump on 1990 Oldsmobile delta 88?
remove the coolent tank and then use the pully to remove the serpentine belt. then you'll be able to see the water pump takes about half an hour tops.
