To replace the water pump on a 2004 Ford Freestar, first disconnect the negative battery terminal and drain the coolant. Remove the serpentine belt and any components obstructing access, such as the alternator or engine mount. Unbolt the water pump from the engine block, clean the mounting surface, and install the new pump with a new gasket. Reassemble everything in reverse order, refill the coolant, and check for leaks.
how can ford freestar 2004 water pump be replaced
One reason a 2004 Ford Freestar may stall out is because of a water damaged PCM. This is a common problem with the 2004 Ford Freestar.
Ford Freestar was created in 2004.
( 26 U.S. gallons ) for a 2004 Ford Freestar
Replace EGR module...do it yourself....takes about 25 minutes
2006 valve cover. Gasket ford freestar 4.2 l
According to the 2004 Ford Freestar Owner Guide : ( 26.0 U.S. gallons )
On a 2004 Ford Freestar : The transaxle ( transmission ) is located in the engine compartment on the drivers side . It is bolted to the " rear " of the engine
where is the location for a blower motor relay on a 2006 ford freestar
According to a website I was looking at : For a 2004 Ford Freestar ( 3.9 and 4.2 ) ( 15 city / 21 highway , miles per U.S. gallon )
firewall 1-----2-----3 4-----5-----6 front of Ford Freestar > driver
inside the vehicle firewall