answersLogoWhite

0

on My 1984 LeSabre, I found that there is a tab near where the wiper arm mounts to the pivot. If you bent the wiper arm back and pull the tab out with a pliers your can then remove the wiper arm. After you put the new one one you have push the tab back in. It has to go far enough in for the spring to be able to pull the wiper against the window.

User Avatar

Wiki User

10y ago

What else can I help you with?

Related Questions

How do you replace wiper crank arm for 2001 Chevrolet impala?

how do you replace wiper crank arm 2001 chevrolet impala?


How do you replace a Subaru rear wiper arm?

removal of rear winshield wiper arm on 07 outback


How do you replace Mazda 626 wiper arm?

To replace the wiper arm on a Mazda 626, first lift the wiper arm away from the windshield until it is at a 90-degree angle. Locate the small tab or clip on the underside of the wiper arm where it attaches to the wiper motor shaft, press it to release the arm. Carefully pull the wiper arm off the shaft, then align the new wiper arm with the shaft and push it down until it clicks into place. Finally, lower the wiper arm back onto the windshield and ensure it is secure.


How do you replace the windshield wiper arm spring on a 2004 Saturn?

To replace the windshield wiper arm spring on a 2004 Saturn, first lift the wiper arm away from the windshield to access the spring mechanism. Carefully remove the wiper arm by loosening the nut that holds it in place, then lift it off the pivot. Replace the old spring with the new one, ensuring it is properly seated in the wiper arm. Reattach the wiper arm and secure it with the nut, making sure it is tightened adequately before lowering the arm back onto the windshield.


How to replace wiper arm Volvo s40?

To replace the wiper arm on a Volvo S40, first lift the wiper arm away from the windshield. Locate the small tab or release mechanism on the underside of the wiper arm where it attaches to the motor shaft, and press it to release the arm. Carefully pull the old wiper arm off the shaft, then align the new wiper arm with the shaft, ensuring it’s properly positioned. Finally, push the wiper arm down until it clicks into place and lower it back onto the windshield.


Why does your wiper not work only in top position?

1. Bad Wiper Blade(s). 2. Improperly connected to wiper arm. See related link for troubleshooting. 3. Wiper Blade is binding on wiper arm for some other reason other than improperly installed. 4. Improper Wiper Arm Tension - clean and lubercate wiper arm hinge area at base of arm near hood. Replace spring if cleaning and lubercating doesn't work. 5. Bent wiper arm. BE CAREFUL HERE - THIS IS A LAST RESORT. Try bending arm back or replace arm.


Fitting instructions to replace fiat punto rear wiper arm?

how do get rear wiper arm off fiat punto grande


How do you replace the wiper arm?

On what make/model/year vehicle?


Replace windshield wiper arm on a Chevy aveo?

yes


How t change rear wiper on Nissan 350 z?

To replace the blade, it just unclips and the new blade clips on. To replace the wiper arm, the black cap at the base of the arm pops up and the arm can be unbolted.


How to replace a wiper blade on a Pontiac Montana?

To replace a wiper blade on a Pontiac Montana, start by lifting the wiper arm away from the windshield. Locate the release tab on the old wiper blade, press it, and slide the blade off the arm. Align the new wiper blade with the arm, ensuring it clicks into place securely. Finally, lower the wiper arm back onto the windshield and repeat the process for the other side if necessary.


How do you replace a 2005 Chevy cavalier windshield wiper arm?

To replace the windshield wiper arm on a 2005 Chevy Cavalier, first, lift the wiper arm away from the windshield. Locate the small tab or clip on the underside of the wiper arm where it connects to the wiper motor shaft and press it to release the arm. Once detached, position the new wiper arm onto the shaft, ensuring it's aligned properly, and push down until it clicks into place. Finally, lower the wiper arm back onto the windshield and test its movement to ensure it’s functioning correctly.