To replace the back seat speakers in a 1995 Ford Probe, first, remove the rear seat by pulling up on the seat bottom to release the clips and then unscrewing or unclipping the seatback. Next, carefully detach the speaker covers or grilles if applicable, and disconnect the wiring harness from the old speakers. Install the new speakers by connecting the wires and securing them in place, then reattach the speaker covers and reinstall the rear seat. Make sure everything is securely fastened before testing the new speakers.
Back seat has to come out and the rear package tray too and then you can get to the bolts that hold the speakers in.
first pop up and pull out the bottom seat then use a star head bit an rachet to pull off the back rest of the back seat then the back panel covering the speakers should come out.
First take out the lower rear seat cushion. Then remove the rear seat back. Loosen the clips on the plastic panels that cover the rear pillars. You should then be able to remove the carpeted cover and get to the speakers.
you remove the door panel to replace the front speakers(all clips) for the rear you have to go in the trunk there are two long bolts comming from the rear seat, remove the screws from them and that releases the back seat allowing you access. hope this helps
To replace the rear speakers in a Solara convertible, first, remove the rear seat by unbolting any screws and lifting it out. Next, gently pry off the rear panel covering the speakers, taking care not to damage clips. Disconnect the old speakers and replace them with the new ones, ensuring proper orientation and wiring. Finally, reassemble the rear panel and seat, securing everything back in place.
The back seat has to come out and the seat back and the package tray has to also come out and then you can get to the bolts that hold the speakers in at the back, as far as the door speakers you have to take the inside door panels off and then you can get to the bolts to the door speakers.
You have to take the back seat out, and then remove the trim panels, you also might have to remove some of the headliner in the back to get the trim off, then you can get to the rear speakers, its one hell of a job
1. Remove bottom part of back seat 2. Unscrew back seat back bolts to remove upper back part of seat 3. Once you do this you can get right at the speakers by removing the cover on top of the speakers
To remove the speakers you have to take out your seats in the back. You have to remove the bottom one first. Then unbolt the seat belts and the bolts by them that will lossen up the back rest part of the seat. then pull the clip to the carpet area that goes up over your speakers. Then pop the clip in the trunk push up on the speakers take out 4 screw and install your new speakers. Put everything back in and bolt bown your seat belts. Not a hard job 30 min. took me with a brake.
The fuel injector
I'm fixing to replace mine and I'm guessing you remove the rear seat both parts and pop up the dash back there
There are two bolts at the bottom of the back seat by the floor.......then you remove seat and take out the two bolts for the upper back seat and then you remove the back dash to get to the speakers! hope this helps