Lift car, remove wheel, remove caliper & caliper bracket (bolts in back near strut). Give the rotor a wack with a hammer if it's stuck on the hub and remove it. Reverse to install.
How is the ignition key switch replaced on the 2000 Pontiac Sunfire? And after replacing the switch would I have to have it Towed to the Pontiac Dealer in order to have the car key programed to the Computer?
Buy a Manual. ;)
Buy a Manual. ;)
To replace the brake light on a 2000 Pontiac Montana open the trunk to reveal the housing units. Find the lights and pull the bulbs out. Replace the units.
where is the location posslook sensor three wires , 2000 pontiac sunfire
You can price the part on any of the big box parts house's websites.
5x100
The brake light switch is located on the brake pedal bracket. You'll need to remove the trim panel beneath the steering column to get to the switch and the connector. FriPilot
If the part number is the same and the configuration is the same then sure.
It might be the high/low beam switch. Had to replace one on my '96 when I had only low beams.
I need to know how to remove a rear wheel speed sensor on a 2002 Pontiac Sunfire
Its by the gas tank